Cosmo COS-UMC30 Manuel et guide de l'utilisateur télécharger pdf (Page 5)

DUCTLESS INSTALLATION

The hood is designed for installation under a kitchen

cabinet:

WARNING

To reduce the risk of electrical shock, switch the power off at

the service panel. Lock or tag the service panel to prevent

power from being switched on.accidentally.

1. Remove the baffle lters from the unit. Replace with Char-

coal Filters (Model CFK2, included with DL Models)

2. Reinforce cabinet with 1” x 2” wood strips if additional

support is required.

DUC

T W

HOUSE

POWER

CABLE

MOUNTING

SCREWS(4)

6. Securely fasten the hood to the cabinet with the mounting

screws

7. Securely fasten the hood to the wall with the mounting

screws

The clean filtered air will diffuse into the cabinet.

3.Temporarily position the rangehood in its intended place.

Using a pencil measure, mark the mounting holes, duct and

electrical locations.

4. Drill/cut out the required openings for damper and electrical

access; ensure the damper opens and closes freely.

5. Connect the electical supply wiring (make sure power supply

is off)

6" VERTICAL DUCT

KNOCKOUT

POWER CABLE

1 2 3 4 5 6 7 8 9

Pas de commentaire

Cosmo COS-UMC30 Manuel et guide de l'utilisateur Page 5