Cosmo COS-QS90 Manuel et guide de l'utilisateur télécharger pdf (Page 7)

CAUTION: HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR

PROTECTIVE GLOVES WHENEVER IT IS NECESSARY TO REMOVE ANY

PARTS FOR INSTALLING, CLEANING OR SERVICING.

Step 1:

A height of 24” to 36” is recommended for

optimal performance.

Rear Mounted Installation

A. Find the 4 key holes in the back of the range

hood. Mark their locations at the installation

location with a pencil or marker.

B. Drill 5/16 (8mm) hole at each of the marked

locations.

C. Insert anchors into each drilled hole. Firmly

screw them into place.

D. Hang your Range Hood into place by aligning

the anchors with the four holes in the back of the

range hood.

INSTALLATION PROCEDURES

24" to 36"

Anchor

Screw

Top Mounted Installation

A. Find the 4 holes in the top of the range hood.

Mark their locations at the installation location

(Bottom of Cabinet) with a pencil or marker.

B. Drill 5/16 (8mm) hole at each of the marked

locations.

C. Insert anchors into each drilled hole. Firmly

screw them into place.

D. Hang your Range Hood into place by aligning

the anchors with the four holes in the top of the

range hood. Push in to place to lock into place

Key Hole

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Cosmo COS-QS90 Manuel et guide de l'utilisateur Page 7