Cosmo C51EIX Manuel et guide de l'utilisateur télécharger pdf (Page 10)

Electrical installation

Electrical Shock Hazard

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock

Only a qualified person in compliance with the instructions provided must install the

appliance. The manufacturer declines all responsibility for improper installation, which may harm

persons and animals and damage property.

Important:

 The power supply to the appliance must be cut off before any adjustments or maintenance

work is done on it.

 Air duct is supposed to use in ventilation.

IMPORTANT:

Local Codes may vary; installation, electrical connections and grounding must comply with all

applicable local codes.

lf local codes permit grounding through the electrical supply neutral, connect both the white neutral

wire and the bare ground wire from the oven to the white neutral electrical supply wire.

All model ovens on the front cover are dual rated, designed to be connected to either 208/240V AC,

60Hz, 3 wire, two-phase power supply. (See Figure 3)

The electrical supply should be 3-wire two-phase AC. Install a suitable conduit box (not furnished).

An appropriately-sized, U-listed conduit connector must be used to correctly attach the conduit to the

junction box.

CIRCUIT REQUIRED

208V,60Hz

240V,60Hz

12 AMP

15 AMP

Figure 3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Cosmo C51EIX Manuel et guide de l'utilisateur Page 10