Cosmo C51EIX Manuel et guide de l'utilisateur télécharger pdf (Page 24)

Replacing the oven lamp

Electrical Shock Hazard

Failure to follow these instructions can result in death, fire, or electrical shock.

1. Disconnect the oven from the power

supply by means of the omni-polar

switch used to connect the appliance to

the electrical mains, or unplug the

appliance if the plug is accessible.

2. Remove the glass cover of the lamp-

holder, turning counter-clockwise. (See

Figure 11)

3. Remove the lamp and replace with a

lamp resistant to high temperatures

(300℃) with the following

characteristics:

 Voltage: 208-240V

 Wattage: 25W

 Type: E 14

4. Replace the glass cover and

reconnect the oven to the mains power

supply.

Figure 11

1 2 ... 19 20 21 22 23 24

Pas de commentaire

Cosmo C51EIX Manuel et guide de l'utilisateur Page 24